About the wiring method of solar street lights

- Mar 26, 2019-

About the wiring method of solar street lights. The solar street light system can guarantee normal work in rainy weather for more than 15 days! Its system consists of LED light source (including drive), solar panels, battery (including battery incubator), solar street light controller, street light pole (including foundation) and auxiliary wire. Let me talk about the wiring method of solar street lights. The following are the main methods.

  1. After the battery is connected, the indicator light of the controller is in a flowing state. (The positive and negative poles are reversed and the controller does not work)

  2. F5

2.After connecting the load, press the “Adjust” button three times to adjust the time and the load is bright. (The load cannot be short-circuited, otherwise the controller will be damaged)

3.The load is not bright, please check the load, or measure the battery voltage 


4.After the photocell is connected, the load is off, indicating that the light control is normal, otherwise, check the photocell.

Among many street lamps, many cities choose to buy solar street lights because they have better quality. Moreover, it has good energy saving and environmental protection ability. Of course, when assembling street lamps, it is very important to understand the corresponding precautions.

Everyone should know that the street lamps in many places used to be powered by electricity. For example, when there was a sudden power outage at night, the streets were dark and dark, and it was very inconvenient to do, and they were not afraid of those who were afraid of black. Take the night road. But now there is no such trouble, because the street lights of many local streets have all been replaced with solar street lights. This kind of lamp is illuminated by the principle of solar energy. During the day, the solar light can be used to convert the city energy. There is also a storage battery for charging, and the power is supplied to the LED light source for use in night illumination.

The above is an introduction to the method of wiring solar street lamps. Of course, this is only part of the method. We can also use other methods of placement, but we must pay attention to personal safety no matter what method we use.