Patent Type Grouped Lighting Pole

Patent Type Grouped Lighting Pole

Patent Type Grouped Lighting Pole Material Test For High Post Lamps & High Mast Lamp: 1.All of our material are purchased from famous mill factory to assure the quality. 2.A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in...
Chat Now

Product Details

Patent Type Grouped Lighting Pole
Material Test For High Post Lamps & High Mast Lamp:
1.All of our material are purchased from famous mill factory to assure the quality.
2.A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory, otherwise we have our reason to refuse the material .
3.Before producing, all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component .

 

Testing Including:
1. Material Testing;
2. Shape Testing;
3.Testing after Galvanization;
4. Tensile Testing;
5. Fittings Checking
We manufacture of High Mast Lighting poles with height from 12M-50M


Here More Points To Clear:

Height

From 12M to 50M

Suit for

Airport ,seaport, plaza, stadium, square, highway station, street way ,etc

Shape

Round, Multi-pyramidal, Column form, polygonal or conical

Material

Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2

Torrance of dimension

+- 2%

Lighting Source

400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²/100W-250W LED

Light plate

Various figure of selection ,material with hot dip galvanization steel frame

Lifting system

Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equippede; ant ferromagnetism brake and break –proof device, manual operation applied under power cut

Electric appliance control device

Electric appliance box to be the hold of the pole, lifting operation could be 5 meter away from the pole through wire. Time control and light control could be equipped to realize full-load lighting mode and part lighting mode

Surface treatment

Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.

Joint of Poles

Insert mode, inner flange mode, face to face joint mode .

Design of pole

Against earthquake of 8 grade

Wind Speed

160 Km/Hour

Welding

We has past flaw testing. Internal and external double welding makes the welding in shape

Thickness

6 mm to 30 mm

Production Process

Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging

Packages

Our poles as normal cover by Mat or straw bale at the top and bottom, anyway also can following by client required

 

Other types for choosen

  


Previous:No Information Next:Street Light Pole Design

Inquiry