Conical Steel Solar Outdoor Light Post

Conical Steel Solar Outdoor Light Post

Q235 Steel Solar Outdoor Light Post in Conical Type Solar Light Pole Components: 1. Column Post 2. Single or Double arms 3. Base Plate 4. Solar Panel Bracket 5. Anchor Bolts (If customer need) Ps: the detail sizes of the pole such as height, diameter, thickness, base plate sizes would be...
Chat Now

Product Details

Q235 Steel Solar Outdoor Light Post in Conical Type
Solar Light Pole Components:

1. Column Post
2. Single or Double arms
3. Base Plate
4. Solar Panel Bracket
5. Anchor Bolts (If customer need)
Ps: the detail sizes of the pole such as height, diameter, thickness, base plate sizes would be designed according to customer's requirement.


Purchase Flow:
1. Supply detail pictures as well as drawings, if no idea, just tell us your technical requirement and our technicist will design what you are wanted;
2. After confirming about the drawing and price, you are appreciated to prepare the advance payment to us, then we will supply production drawing to you again for final confirmation to make sure no mistakes;
3. During production, picture and video can be supplied to you;
4. Goods final produced, arrange balanced payment and we delivery goods.


Production Flow:

image001.jpg


Installation of Solar Street Light Pole:
1. Connect bracket and solar panel

image003_副本.jpg

To avoid abrasion and scratch of solar panel glass, please handle gently.
Tighten the fastening screw. Draw out the wire of solar panel from the pole.


2. Connect bracket and pole

image004_副本.jpg

To ensure the azimuth of solar panel be south after hoisting, please calculate the azimuth of bracket during installation.
Tighten the fastening screw after adjusting the angle.
Draw the wire of solar panel out of the pole and pull it to controller.


3. Install LED lamp

image005_副本.jpg

Put the lamp shell face down when install it and ensure the emitting direction of light be vertical to the ground after hoisting.
Tighten the fastening screw after adjusting the angle.
Draw the wire of lamp head out of the pole and pull it to controller..


4. Install battery

image006_副本.jpg

Put the battery in the battery box and mat the waterproof cushion, then connect the wire and protective casing.


5. Erect pole
Before erection, check and keep all the components are tightened, the solar panel is face to south (with compass), and the orientation of lamp is right;
During erecting, installation personnel should hold the pole and prevent the components rock and rub with the ground;
In the process of erection, adjust the lamp head to toward the road, align the base plate hole to the anchor bolts; when the base plate fall on the foundation, fix two nuts successively; then adjust the verticality of pole and ground; Tighten the nuts with spanner at last.


6. Install controller

image007_副本.jpg

Confirm connection location and anode & cathode marks of solar panel, LED lamp head and battery before connecting.


Inquiry