What should be paid attention to in the design of solar street lamp factory?
With the country's economic development, many industries have gradually stabilized. At the same time, the state is increasing the laying of infrastructure. Solar street light manufacturers street lights are the most common type of infrastructure. At night, these street lights guide us back home. For the design of street lamps, there are some things to be aware of and take into account.
Street light design
1. the setting of the street light main switch
Solar street light manufacturer street light is an outdoor product that needs to withstand the effects of various harsh environments and can work normally. Therefore, the quality requirements of its various components are very high, and some special materials are processed in addition to some outdoor materials. The selection of the main switch of the street lamp, this is the matter that needs attention when designing the street lamp. In order to avoid the phenomenon of leakage in rainy weather, it is best to use 4P switch, the quality is guaranteed.
2. Arrangement of street lamps
The street lights we saw on the streets were laid in two rows, and the distance between the two street lamps was of a certain standard. Therefore, the arrangement of street lamps is also considered when designing. According to the actual situation of the road surface, it is laid on one side, laid on both sides or staggered. Each type of laying has its own advantages and disadvantages, and it is necessary to find a layout that is most suitable for the current environment.
3.street lamp installation height
We know that the height of the street lights is inconsistent and the lighting conditions are different. When designing street lamps, be sure to consider the actual situation in the local area to determine the height of the lighting. In general, the height of the street lamp installation is 10-15m, and the light effect at this distance is the best. Do not exceed the length of the cantilever by a quarter of the height.
4.the way the street lights are controlled
The current street lights basically use an intelligent control system, which is to set the time when the street lights are turned on and off according to the actual lighting conditions. This is going to the actual local inspection, but also to count the sunrise and sunset time of the region throughout the year, so that it is convenient to set the time. It is also necessary to investigate the actual flow of people on this road. For example, in the middle of the night when there are not many vehicles, it is appropriate to turn off several lights.
5. solar street lamp manufacturers street lamp power distribution mode
The situation of the street lamp arrangement is determined whether it is single-sided, double-sided or cross-over. Then, according to this actual situation, the number and size of the distribution boxes should be allocated to ensure the normal use of the street lamps.
Above we need to pay attention to and consider the problems in the design of street lamps. Solve these problems, the street lights will not have problems under actual use.