How To Install Solar Street Lights Correctly?

How To Install Solar Street Lights Correctly?

How to install solar street lights correctly?
Chat Now

Product Details

How to install solar street lights correctly?

 The installation of solar street lamps is generally carried out by the professional staff of the factory. Some of them are arranged by the dealers and the manufacturers themselves. Today, Xiaobian will tell you about some points of attention in the installation process of solar street lamps.
 Take the site where the company installed solar street lights on the scene in Hunan:
 First, solar street lights, vertical lights, pole installation, wiring,
 Among the considerations:
 1) When installing the battery pack, handle it gently. Do not short-circuit the component or throw the component.  2) The power cable and the junction box, the lamp post and the assembly threading are sealed with silicone. The battery component cable should be fixed firmly at the bracket to prevent the cable from loosening or falling off due to long-term sag or pulling.  3) When installing the lamp holder and the light source, take care to ensure that the translucent cover is clean and free of scratches. Rolling and throwing are strictly prohibited.  4) Do not touch the battery terminals and control valves when moving the battery. Do not short circuit or roll or throw the battery.  5) Pay attention to the positive and negative poles when wiring. It is forbidden to reverse the connection. The terminal is crimped firmly and there is no looseness. At the same time, the connection order should be paid attention to.  6) Do not touch the “+” and “-” poles of the solar cell module and battery at the same time to prevent electric shock.  7) The inverter outputs a high voltage power supply, which is dangerous to touch!  8) Avoid scratching the lamp body during installation.  9) The bolt joints of the lamp cap, lamp arm, upper lamp post assembly and solar cell module are firmly connected without looseness.  10) A guard plate must be added when installing the solar cell module.  11) The galvanized hole of the pole is sealed with silicone, paying attention to the appearance.

Inquiry